Astar HT-3300 Spezifikationen PDF herunterladen (Seite 95)

Reference Manual

00809-0100-4811, Rev DA

Section 4: Basic Configuration/Start-Up

January 2015

Basic Configuration/Start-Up

4.6.12 Setup - Display

The Display tab allows you to specify which parameters to appear on the display panel. The

display has two rows, the upper row with five characters is for the measured value, and the lower

row with six characters is for the value name. The display toggles between the different variables

every 2 seconds.

Figure 4-10. Setup Display Tab

Select one of the following options:

Table 4-4. Display Parameters

Parameter Description

Level Product level

Distance Distance from the upper reference point to the product surface

Volume Total product volume

Internal Temp Temperature inside the transmitter housing

Interface Distance Distance between the upper reference point and the interface between the

upper and lower product

Interface Level Level of the lower product

Interface Thickness Thickness of the upper product

Amplitude Peak 1 Signal amplitude of the reflected signal from the reference pulse

Amplitude Peak 2 Signal amplitude of the reflected signal from the product surface

Amplitude Peak 3 Signal amplitude of the reflected signal from the surface of the bottom

product (interface measurements)

Percent Range Level value in percent of total measurement range

Analog Out Current 4 -20 mA current

Signal Quality Information on signal quality

Surface/Noise Margin Information on surface/noise margin

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 223 224

Keine Kommentare

Astar HT-3300 Spezifikationen Seite 95